DIY Mojave Front Bumper | Jeep Cherokee XJ & Comanche MJ (1984-2001)

DIY Mojave Front Bumper | Jeep XJ/MJ - DirtBound Offroad
DIY Mojave Front Bumper | Jeep XJ/MJ - DirtBound Offroad

DIY Mojave Front Bumper | Jeep Cherokee XJ & Comanche MJ (1984-2001)

4th of July Sale SAVE 17%

Use discount code Freedom at checkout to receive an additional 17% off this item! 
Save {price}

  • Lifetime Warranty

  • Made in the USA since 2010

  • Small Business

Item: 2310
  • American Express
  • Apple Pay
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

100% Secure Checkout 


🌟 Take Your Jeep XJ/MJ to New Heights with a DIY Mojave Front Bumper! 🌟

If you've got the welding and fabrication skills and are looking to boost both the aesthetics and off-road capabilities of your Jeep XJ/MJ, our DIY Mojave Front Bumper is your ultimate solution.

Why the DIY Mojave Front Bumper is Your Next Must-Have Upgrade

🛠️ Quality Craftsmanship:
Our bumper is CNC laser-cut from 3/16" steel, providing a strong and durable foundation for your DIY project.

🔩 Designed for Easy Fabrication:
Pre-formed components simplify the fabrication process, making your build both enjoyable and straightforward.

🚗 Optimized Performance:
Designed for the highest approach angle and ground clearance, this bumper empowers you to conquer even the toughest terrains.

🔒 Strength Where You Need It:
1/2" thick shackle tabs and frame tie-in brackets add additional levels of strength and durability.

🔧 Perfect Fit:
Frame tie-in brackets come with full adjustability for precise vehicle fitment.

📦 Mounting Hardware Included:
A complete hardware kit is included to ease the installation process.

Proudly Made in the USA:
Crafted in our Chisago City, MN facility to meet the highest quality standards.

Important Note

This DIY kit requires welding and fabrication skills. Hitch Tube sold seperate. 

What’s Included

  • DIY Mojave Front Bumper Kit for Jeep XJ/MJ
  • Frame Tie-In Brackets
  • Complete Hardware Kit
  • Fabrication Guide

Gear Up for Your Next Adventure

Enhance the front of your Jeep XJ/MJ with a bumper that not only looks great but is also built for rugged off-road action. Order your DIY Mojave Front Bumper today and hit the trails with newfound confidence!

Fabrication Difficulty:

Fabrication Time: 4-8 Hours



Lead Times: All DirtBound items, including Bumpers, Sliders, Welded Flares, and Skid Plates, are made in our Chisago City, MN Fabrication shop. Most items are Made-To-Order unless marked as In-Stock, which means they have minimal lead times. We take pride in the quality work we produce, and we know you won't find anything like it on the market. To view our current lead times, please click here. please click here.


Customer Reviews

Based on 20 reviews
axel dolph
Great product

This bumper went together well. All parts fit as they should. I used it on another vehicle and modified the brackets heavily, narrowed the center, added to the bottom, and trimmed the tips.

Dallas Webb
DIY Mojave front bumper

Absolutely amazing quality. Easy to assemble if you are a good welder this is definitely the kit for you.

Darren O
Mojave front bumper

Very good bumper for the price. For what I intend to use the jeep for. Welded up nice.

Taylor P
Great bumper

Took off a winch bumper in favor of this one. It came pre-bent(except for the rounded wings), and the hole for the hitch was pre-cut completely. There was no filler plate for the hitch hole, keep that in mind if you don’t want the hitch, which is also sold separately. I was concerned about bending the rounded wings, but with a rubber mallet and a large adjustable wrench it was pretty easy to tac them as I bent around to make them look good.
Over all this thing went together very easily, my only complaint would be that the d ring loops just weld to the bumper face, I’d rather they go through it and weld along the frame mounts too. It looks so much better than the winch bumper that I took off.

Carson S

I looked at a lot of bumpers but liked the way this one did not stick out too far, along with a nice clean sleek look with good approach angles, along with a receiver for a removable winch. Was super easy to weld together very well done pre bends and cuts made it easy. I am very happy with how it turned out really improved the look and capability of my Jeep.

Aaron V

Bumper looks great now, but when I got it, the pre-bent sections were not fully bent so it was difficult to line up and tack up before welding bumper entirely. Also ordered a hoop from Barnes 4wd to weld on and it looks great.

Michael M

Great product and I loved the way it turned out

Mitch T

The DIY Mojave bumper that I ordered is great quality, I has nice clean cuts, everything fits together nicely for easy fabrication, but my experience with Dirtbound Offroad has been less than stellar. I ordered the DIY bumper, and the receiver tube, and when the package came I was missing both ½” shackle mounts, and half of the hardware to mount the bumper to the unibody of my XJ. Plus, it took over 6 weeks to get my order. I can understand that kind of a backlog on finish welding and paint etc.. but to plasma cut, wire wheel and bend some 3/16 material, it should not take that long – and if it does, you better have the entire order fulfilled. Its just a disorganized process, and no attempt to keep the customer informed of what’s actually going on, other than a statement of the website that says “please be understanding, we only have 6 employees.” If you have that much of a workload hire some new employees and get your order fulfilled. Like I said, I really wanted to have a good experience with the company, I really like the Mojave bumper, that it doesn’t stick 4 feet out in front of the jeep like a lot of other DIY bumpers from other companies, but I would hesitate to order anything else from Dirtbound unless they streamline their process a lot. I sent an email to the address on my packing slip, explaining that I was missing parts but I was really impressed, I understand with supply chain blah blah blah.. but Its been almost a week and I still haven't heard anything back.

Guy M

Received my DIY Mojave front bumper, quality looks excellent. Isn’t welded up yet. Waiting for my good friend to have some free time to weld it together!.

marc f

Looks really nice wish the sides didnt stick out as much as they do and wish it had the option for no front receiver but just made my own plate to fill in the receiver hole since it came fully cut out unlike the picture over all would buy this again good quality and easy to build light but feels strong